Client: Engineering Consulting Company in Canada

‍

We were contracted to provide the protection and coordination analysis for a power line upgrade as well as verification of the voltage boost capacity of the specified Automatic Voltage Regulators (AVRs). Scope of work:

Protection Settings: Verification of Coordination of Updated Protective Devices with Upstream and Downstream Protective Devices

Load Flow: Load Flow to verify AVR Capacity under Increased Load

Data Validation: Digital Model Settings Validated against Device Specifications

Time Current Curves: Visual Representation of Updated Protective Device Settings

Client: Energy Distribution Company in Canada

We are partnering with a large energy distribution company in NA to digitalise their substations into ETAP, including component mapping, protective device and TCC builds, and database validation for Load Flow, Short Circuit and Arc Fault studies.

‍

Client: Petro Peru, COBRA Engineering

In Partnership with: Electro Integra SAC

‍

Due to the development of a new section of the Talara refinery, the digital twin was modelled in ETAP including four main loading conditions and over a dozen scenarios, to carry out the following electrical studies: Load Flow, Short Circuit, Protection & Coordination, Motor Acceleration, Load Shedding, and Ground Grid.

‍

Client: Canadian Airport

Potential took their legacy digital models and converted them to an integrated digital twin in ETAP. The new model provides them with access to ETAP’s wide catalogue of powerful analysis tools that will enable their engineers to more effectively plan and implement changes and upgrades to their electrical power system.

‍

Intelligent Single-Line Diagram: A Digital Twin for Future Electrical Analysis and Root Cause Identification of Electrical Failures

Electrical Digital Twin: A Comprehensive Electrical Model Covering High to Low Voltages

Data Validation: Digital Model Settings Validated against Device Specifications

Time Current Curves: Visual Representation of Updated Protective Device Settings

Client: Anglo American

In Partnership with: Electro Integra SAC

We are working alongside our sister company, Electro Integra SAC, to provide a real-time system for a mine in Peru.

Client: Electro Puno S.A.A.

In Partnership with: Electro Integra SAC

We are working alongside our sister company, Electro Integra SAC, to provide a real-time system for an electrical utility company located in Puno, Peru. Our contribution includes aiding to provide an Integrated ADMS Solution using ETAP, specializing in the implementation of ETAP eProtect as a centralized enterprise protection asset management solution.

‍

Client: SPCC

In Partnership with: Electro Integra SAC

‍

Load Flow, Short Circuit and Harmonic studies for the Toquepala 69 kV Mine Electric System.

Client: WSP

In Partnership with: Electro Integra SAC

‍

Load Flow, Short Circuit, Coordination, Motor Acceleration and Harmonic Studies for the Electric System of the Messer Room - Sider Peru

Client: CHINALCO

In Partnership with: Electro Integra SAC

‍

To improve the safety and reliability of their electrical system, Minera Chinalco-Toromocho requested a full arc flash study of their electrical system.

Client: CHINALCO

In Partnership with: Electro Integra SAC

‍

Minera Chinalco-Toromocho electrical system presented abnormal events that required specialized electrical studies to determine the root cause of these events. Abnormal events included the failure of power transformers, cycle converters, untimely mill outputs, and others.

‍

‍

Client: Coga

In Partnership with: Electro Integra SAC

‍

Due to some events related to the electrical protection system, COGA required an electrical study to verify if the electrical protection mesh is operating with the values and parameters indicated by the applicable electrical systems standards.

‍

‍

Client: COBRA Engineering

In Partnership with: Electro Integra SAC

‍

We developed an electrical digital twin for the PetroPeru refinery electrical system using ETAP.

‍

Client: South American Mining Company

In Partnership with: Electro Integra SAC

‍

We conducted a feasibility study for the client to design and implement an electric Mine Haul system, aiming to assess the required size of the electrical system and the expected performance of the electric Mine Haul trucks at the mine site. The study included:

‍

GIS Model: We mapped out in GIS future mining tracks and an electrical system that would be needed to run these trucks using a trolley system with DC substations. We performed the necessary studies to size the AC and DC components of the system.

‍

Electrical Studies: Short Circuit and Load Flow Studies, a comparison between diesel and electric truck performances, and equipment requirements and sizing with manufacturer information.

‍

Single-Line Diagram: Combined the eTraX GIS model with electrical infrastructure provided by the client, and modelled new electrical components required by the new system.

‍

Client: HLC

In Partnership with: Electro Integra SAC

‍

We developed the digital twin and performed Load Flow, Short Circuit, Relay Coordination and Motor-Starting Studies for a new gold mine in Chile.

Client: Lafarge

In Partnership with: LEC
‍

Provided project management and engineering consulting services for the development of a truck fleet electrification solution.